TW4421/TW4422

The TW4421/TW4422 employ Tallysman’s patented Accutenna® technology covering the GPS L1, GLONASS G1, and SBAS (WAAS, EGNOS & MSAS) frequency bands (1574 to 1606 MHz). It provides truly circular response over its entire bandwidth thereby producing superior multipath signal rejection resulting in higher accuracy of position and timing.

Features

  • Accutenna® Technology
  • Tight phase centre variation
  • High rejection SAW filter
  • Low noise LNA: 1dB
  • Temperature compensating LNAs

Benefits

  • Superior multipath signal rejection
  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

The TW4421/TW4422 is housed in a compact, magnetic or adhesive mount, IP67 compliant housings. The antenna can be ordered without the magnet. In such cases, the magnet is replaced with a plastic plug to provide a smooth under surface. A double sided tape can then be used to mount the antenna.

It is RoHS and REACH compliant.

For further details, please download the Datasheet.

Mechanical:

Architecture: Dual, quadrature feeds
Size: 38mm x 38mm dia. x 14.3mm H
Weight: 50g
Enclosure: Radome and Base: ASA Plastic
Attachment Method: Magnetic or Adhesive
Environmental: IP67, REACH, and RoHS compliant

Electrical:

LNA Gain: TW4421: 28dB TW4422: 26dB
Supply Current: 10mA typ. 15mA max. @ 85°C
Supply Voltage: 2.5 to 16 VDC nominal (12VDC recommended max.)
Noise: 1 dB typ.
Axial Ratio over full bandwidth: <1.5 dB @zenith, ≤2.5dB max

For further details, please download the Datasheet.

The attached document (PDF) contains graphical representation of the axial ratios, Phase Center Variation (PCV), Phase Center Offset (PCO), and gain patterns over elevation and rotation (azimuth) as measured by an independent laboratory.

TW4421 Measurements

The TW4421/TW4422 employ Tallysman’s patented Accutenna® technology covering the GPS L1, GLONASS G1, and SBAS (WAAS, EGNOS & MSAS) frequency bands (1574 to 1606 MHz). It provides truly circular response over its entire bandwidth thereby producing superior multipath signal rejection resulting in higher accuracy of position and timing.

Features

  • Accutenna® Technology
  • Tight phase centre variation
  • High rejection SAW filter
  • Low noise LNA: 1dB
  • Temperature compensating LNAs

Benefits

  • Superior multipath signal rejection
  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

The TW4421/TW4422 is housed in a compact, magnetic or adhesive mount, IP67 compliant housings. The antenna can be ordered without the magnet. In such cases, the magnet is replaced with a plastic plug to provide a smooth under surface. A double sided tape can then be used to mount the antenna.

It is RoHS and REACH compliant.

For further details, please download the Datasheet.

Mechanical:

Architecture: Dual, quadrature feeds
Size: 38mm x 38mm dia. x 14.3mm H
Weight: 50g
Enclosure: Radome and Base: ASA Plastic
Attachment Method: Magnetic or Adhesive
Environmental: IP67, REACH, and RoHS compliant

Electrical:

LNA Gain: TW4421: 28dB TW4422: 26dB
Supply Current: 10mA typ. 15mA max. @ 85°C
Supply Voltage: 2.5 to 16 VDC nominal (12VDC recommended max.)
Noise: 1 dB typ.
Axial Ratio over full bandwidth: <1.5 dB @zenith, ≤2.5dB max

For further details, please download the Datasheet.

The attached document (PDF) contains graphical representation of the axial ratios, Phase Center Variation (PCV), Phase Center Offset (PCO), and gain patterns over elevation and rotation (azimuth) as measured by an independent laboratory.

TW4421 Measurements