TW3070/TW3072

The TW3070/TW3072 cover the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency bands (1565 to 1585 MHz). It provides great axial ratio, excellent circular polarized signal reception, great multipath rejection and great out-of-band signal rejection.

Features

  • High rejection SAW filter
  • Low noise LNA: 1dB
  • Temperature compensating LNAs

Benefits

  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

The TW3072 has an additional tight pre-filter to protect against saturation by high level sub-harmonics and L-Band signals.

The TW3070/TW3072 are housed in a through-hole mount, weather-proof enclosure for permanent installations. They are available with either a flat or conical radome in either grey or white. The TW3070/TW3072 is also available with either a TNC or N-Type connector on the base of the antenna or with a flying lead and a variety of connectors. L-Bracket or Pipe Mount (part numbers 23-0040-0, 23-0065-0 respectively) are available for non-rooftop installation. They are IP67, RoHS, and REACH compliant.

PLEASE NOTE: The TW3070/TW3072 is identical to the TW3040/TW3042 in every detail. New Customers: Please order the TW3040/TW3042 Existing Customers: Where ever possible, please use the part number for the TW3040/TW3042 OR continue to use the existing part number.

For further details, please download the Datasheet.

Mechanical:

Architecture: Wideband single feed patch
Size: 66.5mm diameter
Weight: 150g
Enclosure: Radome: EXL9330, Base: Zamak White Metal
Attachment Method: Through hole (M18 x 1 thread)
Environmental: IP67, REACH, and RoHS compliant

Electrical:

LNA Gain: 40 dB typ
Supply Current: 15mA typ. at 25°C
Supply Voltage: 2.5 to 16 VDC nominal (12VDC recommended max.)
Noise: 1 dB typ. (TW3070) 3 dB typ. (TW3072)
Axial Ratio (over full bandwidth): 4 dB at 90°, 6 dB at 20°

For further details, please download the Datasheet.

The TW3070/TW3072 cover the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency bands (1565 to 1585 MHz). It provides great axial ratio, excellent circular polarized signal reception, great multipath rejection and great out-of-band signal rejection.

Features

  • High rejection SAW filter
  • Low noise LNA: 1dB
  • Temperature compensating LNAs

Benefits

  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

The TW3072 has an additional tight pre-filter to protect against saturation by high level sub-harmonics and L-Band signals.

The TW3070/TW3072 are housed in a through-hole mount, weather-proof enclosure for permanent installations. They are available with either a flat or conical radome in either grey or white. The TW3070/TW3072 is also available with either a TNC or N-Type connector on the base of the antenna or with a flying lead and a variety of connectors. L-Bracket or Pipe Mount (part numbers 23-0040-0, 23-0065-0 respectively) are available for non-rooftop installation. They are IP67, RoHS, and REACH compliant.

PLEASE NOTE: The TW3070/TW3072 is identical to the TW3040/TW3042 in every detail. New Customers: Please order the TW3040/TW3042 Existing Customers: Where ever possible, please use the part number for the TW3040/TW3042 OR continue to use the existing part number.

For further details, please download the Datasheet.

Mechanical:

Architecture: Wideband single feed patch
Size: 66.5mm diameter
Weight: 150g
Enclosure: Radome: EXL9330, Base: Zamak White Metal
Attachment Method: Through hole (M18 x 1 thread)
Environmental: IP67, REACH, and RoHS compliant

Electrical:

LNA Gain: 40 dB typ
Supply Current: 15mA typ. at 25°C
Supply Voltage: 2.5 to 16 VDC nominal (12VDC recommended max.)
Noise: 1 dB typ. (TW3070) 3 dB typ. (TW3072)
Axial Ratio (over full bandwidth): 4 dB at 90°, 6 dB at 20°

For further details, please download the Datasheet.